4″ Lift Kit - RCD 10-42408

Description

Ford F250/350 '08 4" 4WD Radius Arm Drop Kit
2008 and / or current year model OEM Factory Chassis Applications are subject to change without notice.Special caution should be taken when installing on late model applications.RCD can not and will not be responsible for changes mid year by the OEMs and or improper or improvised installation.
* Rear ride height listed is approximate and may vary depending on vehicle model.RCD supplies a 4.25" block that replaces the factory unit.This block is a direct replacement unit with the factory style bump-stop wing cast into it.RCD does not, nor does it recommend stacking blocks. Some vehicles are equipped with different size factory blocks and may require additional lift.Longer U-bolts may be required depending on leaf pack.
Requires Wheels with a Maximum of 4 5/8" of Backspacing.
System clears 35" x 12.50" tires on an 8" wide wheel; minor trimming may be necessary.Trimming may be required depending on actual wheel / tire width, offset, actual tire diameters, etc.
Standard Front End Disassembly Tools are required for Installation.
System requires 4 wheel re-alignment following installation.
Speedometer recalibration is required if larger tires are installed (larger than 10% over factory units).
Factory Steering Stabilizer is retained.
System Features (4) Zinc Plated Bilstein 5100 Series Performance Mono-tube Shock Absorbers.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Make Model Year
SKU 10-42408 Category
Manufacturer:

$1,464.00

Description

Ford F250/350 '08 4" 4WD Radius Arm Drop Kit
2008 and / or current year model OEM Factory Chassis Applications are subject to change without notice.Special caution should be taken when installing on late model applications.RCD can not and will not be responsible for changes mid year by the OEMs and or improper or improvised installation.
* Rear ride height listed is approximate and may vary depending on vehicle model.RCD supplies a 4.25" block that replaces the factory unit.This block is a direct replacement unit with the factory style bump-stop wing cast into it.RCD does not, nor does it recommend stacking blocks. Some vehicles are equipped with different size factory blocks and may require additional lift.Longer U-bolts may be required depending on leaf pack.
Requires Wheels with a Maximum of 4 5/8" of Backspacing.
System clears 35" x 12.50" tires on an 8" wide wheel; minor trimming may be necessary.Trimming may be required depending on actual wheel / tire width, offset, actual tire diameters, etc.
Standard Front End Disassembly Tools are required for Installation.
System requires 4 wheel re-alignment following installation.
Speedometer recalibration is required if larger tires are installed (larger than 10% over factory units).
Factory Steering Stabilizer is retained.
System Features (4) Zinc Plated Bilstein 5100 Series Performance Mono-tube Shock Absorbers.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.